Solar Powered Fountain Pump
This Floating Solar Light Water Fountain Lake Garden Stake Decoration is designed for fountain pond or outdoor use. It gets power directly from the sun. It features quick start-up equipment, high-efficient and stable. It will float on the water surface, no power connection needed, quite easy to install. It is widely used for garden decoration, birdbath, and little pond cycling oxygen aeration, artificial hill fountain and so on.
The pump will start automatically in 3 seconds once exposed insufficient sunlight, no battery or electricity needed. Easy to move to different places to use.
An ideal pump for birdbath, small pond, fish tank and water circulation for oxygen
Tips for Using the Solar Pump
1. Clean the pump regularly to avoid the pump from getting stuck.
2. Don't make the pump work without water for a long time, or its lifespan will be shortened.
3. The pumps will work continuously only under bright sunshine. It will also be affected by weather, seasons, places, etc. The pump will start automatically in 3 seconds once exposed insufficient sunlight, no battery or electricity needed. Easy to move to different places to use.
Solar Panel: 7V/1.4W
Brushless Pump Input: DC 4.5-10V
Maximum Flow: 150L/h
Maximum Spraying Height: 45cm(18’’), Regular: 10~15"
Minimum water depth in fountain should be 2"
Panel Size(Diameter x Thickness): 16 x 1.2cm
Note: The factory voltage should not be too high. It doesn't have much power when it comes to the consumer's hand, so the battery needs to be turned off and exposed for 6-8 hours.
The battery is activated for 6-8 hours after shutdown and can be used normally. Some customers have insufficient ambient light, or people often come and go to trigger work, and the product enters the circuit protection state. The same solution: shut down! Activate the battery for 6-8 hours of exposure! Used at boot. Then it will work in good condition.